Can take profile type or sheet type, and add printing equipment to produce different veins.
SPECIFICATION
| A | EMD-52 TWIN SCREW EXTRUDER | |
| 1 | GEAR BOX | – motor: 15 HP-4P AC with inverter |
| 2 | MATERIAL FEEDING SYSTEM | – screw: dia. 52 m/m |
| 3 | SCREW | – L/D: 24:1 |
| – screw Dia: dia. 52 m/m | ||
| – screw no. 2 | ||
| 4 | BARREL | – material: alloy steel |
| 5 | ELECTRICAL CONTROL | – independable control panel |
| 6 | VACUUM SYSTEM | – vacuum pump: 2 HP |
| B | EWT-6000V WATER COOLING TANK | – water tank: material: sus#304 |
| C | ETB-051024 BELT HAUL-OFF UNIT | – effective track length: 400 m/m |
| – effective track width: 100 m/m | ||
| – effective track height: 150 m/m | ||
| D-1 | EMBOSSING UNIT | – two roller type |
| D-2 | EMBOSSING ROLLER | no |
| E | AIR-CUTTER | – air cylinder: f 32 x 45mm(stroke) |
| – speed range: 1~ 6 m/min | ||
| F | WD-800E DOUBLE BOBBIN WINDER | – double bobbin winder |
| – bobbin: 2 sets of aluminum alloy disc, united shaft coupling for easy operation | ||
| – ID: 200m/m , OD: 800m/m, width: 100m/m | ||
| G | MOULD | – die head and sizing mould |
| II | PRINTING AND PRIMER COATING UNIT (ON LINE) | no |
| A | TENSION CONTROL UNIT | no |
| B | FC-220 THREE COLOR PRINTING /COATING /DRYING M/C | – 1ST / 2ND / 3RD roller sets for printing |
| – 4th roller sets for UV coating | ||
| – UV dryer x 1 set | ||
| – roller size: 320 mm, effective printing width: 200 mm | ||
| C | EXTRA PRINTING ROLLER | – copper plate size: dia 120*250mm |
| – press roller size: dia. 100*250mm | ||
| D | PRIMER COATING M/C | no |
| * Specifications are subject to change without notice. | ||
